MIK-LWGY Liquid Turbine Flow Meter

Short Description:

A liquid turbine flow meter is a type of flow meter that is commonly used to measure the flow rate of liquids in a pipeline. It works by using a turbine rotor that is placed in the flow stream, which rotates as the liquid flows past it. The rotation of the rotor is detected by a sensor and converted into a signal that is proportional to the flow rate.

One of the key advantages of liquid turbine flow meters is their ability to provide highly accurate flow measurements, even for low flow rates. They are also highly responsive and can provide real-time data, making them ideal for use in applications where precise flow control is essential.


Product Detail

Product Tags

Introduction

The LWGY turbine flowmeter is connected to the converter through the flow sensor and realizes various functions such as pulse output, current output, and on-site display. The flow meter has the characteristics of high precision, wide measurement range, long life, simple operation, maintenance, etc. It can be widely used in food, medicine, petrochemical, metallurgy, papermaking, and other industries, and is an ideal instrument for flow measurement.

The flow meter is suitable for liquids that do not corrode stainless steel 304, 2Cr13, corundum (Al2O3), cemented carbide, etc., and have no impurities such as fibers and particles.

Liquid turbine flow meters are commonly used in a wide range of industries, including the chemical, pharmaceutical, food and beverage, and oil and gas industries. They are also frequently used in water treatment plants and in the measurement of fuel consumption in vehicles.

Overall, liquid turbine flow meters are a highly reliable and accurate means of measuring liquid flow rates, making them an essential tool in a wide range of industrial and commercial applications.

Specification

Product Name Liquid Turbine Flow Meter
Medium Liquid (water, beverage, lubricating oil, hydraulic oil, organic liquid, inorganic liquid without fiber and particle impurities, etc.)
Nominal diameter DN4-DN200mm
Accuracy 1.0 % (standard), 0.5%
Medium viscosity <5×10-6m2/s (>5×10-6m2/s, the flow meter should be calibrated in real liquid before use)
Medium temperature -20 ℃- + 120 ℃ (stainless steel pipe)
Ambient temperature -20 ℃- + 60 ℃
Relative humidity 5%-90%
Atmospheric pressure 86kpa-106kPa
Power supply 3.6V, 12V, 24V
Signal output pulse signal, 4~20mA current signal, Modbus
Ingress protection IP65 (IP67, IP68 optional, pulse converter probe IP00)

turbine flow meter

 


  • Previous:
  • Next:

  • Write your message here and send it to us